Archive

News archive

4 MWp plant built in winter conditions
January 3, 2022

Under partly adverse weather conditions, this 4 MWp plant was built in the Netherlands.

Huge PV-plant in Western Germany
October 16, 2021

Within 4 summer months an impressive PV-plant was built in Saarland, Western Germany.  22.6 MW peak power is now supported  by hema rack Type II 4V.

Completion of a 150 KWp plant
September 5, 2021

We were able to work on a small but beautiful PV-plant in Hessen. An average  yield of 150 KWp is expected for the future.

5,1 MWp plant in record time
August 9, 2021

In record time this 5.1 MWp plant in Bavaria could be realized along a highway.

Completion of a 1.5 MWp system
August 5, 2021

A 1.5 MWp PV-system was installed on schedule in the Netherlands.

Installation start of a 4 MWp system
May 28, 2021

In Lower Bavaria a 4 MWp system is going in using the hema rack Type II 3V.

Installation start of a  1 MWp system
May 27, 2021

In Baden-Württemberg a 1 MWp ground mounted system went into construction using the hema rack Type II 4V.




Installation start of a  6 MWp system
April 21, 2021

In Upper Palatinate in Bavaria, the go-ahead was given for a 6 MWp PV-system with our hema rack Type II 4V system.


Completion of a 1,5 MWp system
March 26, 2021

Within a few weeks this hema rack ground mounted system was installed in Upper Bavaria using the Type II 3V system.





Installation start of a 3 MWp system
March 04, 2021

In Saxony-Anhalt a 3 MWp ground mounted system went into construction using the hema rack Type II 4V.


Installation start of a 2.25 MWp system
March 01, 2021

In Upper Bavaria a 2.25 MWp system is going in using the hema rack Type II 2V.

Installation start of a 2.75 MWp system
February 23, 2021

In Upper Bavaria, the go-ahead was given for a 2.2 MWp PV-system, as often with our hema rack Type II 3V system.


Start of installation of a 2.2 MWp plant
November 23, 2020

In Upper Bavaria, the go-ahead was given for a 2.2 MWp PV-system hema rack Type II 3V.

Installation start of a 1.4 MWp system
November 17, 2020

Another hema rack Type II 3V PV-system is being built in the Netherlands.


Good installation progress in Vienna
November 9, 2020

The huge 11.5 MWp plant near Vienna is in good progress, and everyone involved is doing their best for this demanding project.

Start of installation on a 11.5 MWp system
October 23, 2020

The up to now largest PV-ground mount project using a hema rack system is being built just outside the gates of Vienna. The system installed is hema rack Type I 2V.
The posts have already been rammed and installed. At the moment the top racking parts are being mounted.

Installation start of a 2.2 MWp system
October 22, 2020

In Mecklenburg-Western Pomerania a
2.2 MWp is going in using the
hema rack Type II 4V.

Construction start of a
1800 kWp PV-system

October 15, 2020

In Upper Bavaria hema rack is delivering the mounting structure Type II 3V for a 1.8 MWp ground mounted system using 3 modules in vertical position above each other.

hema rack exceeds the 120 MW mark
October 2, .2020

The hema rack systems are convincing: In 2020, over 120 MW PV sub-frames have been installed so far. With around 150 MW by the end of the year, we will far exceed our target for 2020.

Thanks to all customers and project partners for this great trust!

Good progress in Bavaria
September 24, 2020

The 10 MWp PV-ground mount system that started construction mid August shows good progress. The ground mounted racking system hema rack Type II 3 V is fully installed and at the moment the modules are being placed.


Start of construction of a 6.7 MWp plant
September 23, 2020

Installation on another impressive PV-System with 6.7 MWp capacity has just started in the Netherlands. The system used is the proven hema rack Type II 3V.



Start of installation of a 2.8 MWp PV-plant
09/21/2020

In Saxony-Anhalt a 2.8 MWp ground mounted system went into construction using the hema rack Type II 4V.

Start of installation on a 1.8 MWp
PV-plant

November 8, 2020

In the Netherlands the prepatory works for ground mounted PV-system have started. The mounting system chosen is the hema rack Typ II 6H (6 modules in horizontal orientation above each other).

750 kWp plant almost ready
October 8, 2020

The PV-installation started in mid-July with hema rack Type II 3V in Germany is about to be completed.


Another east-west-system
with 7.75 MWp

July 15, 2020

Energy gain from morning to evening:
another plant after
hema rack Type IV in east-west design is currently being built in Germany.

Moved into new office buildings
July 7, 2020

We moved into our new offices!

At the moment the final finishing touches

are being applied.

Several east-west plants under construction
April 3, 2020

Two remarkable plants are currently being built in the Netherlands: These are systems with the east-west system hema rack Type IV with 3 vertical module rows.
With this design, the area is optimally used all day for energy generation.


The project started in February is a 7.2 MWp system, at the beginning of April an 880 kWp system was added.




hema rack GmbH is successfully and officially certified according to EN ISO 9001: 2015
March 19, 2020

After an extensive certification process with the TUV Austria hema rack GmbH officially receives the certificate according to EN ISO 9001: 2015. This prooves once more: our internal quality control of work and production processes guarantee the satisfaction of our customers and partners. Many thanks to all involved!

Zertifikat TÜV Süd

Impressive 10.5 MWp
in Upper Bavaria
January 16, 2020

An impressive 10.5 MWp system in Upper Bavaria has been supplying electricity from solar power since December 2019.


Hema rack thanks everyone involved for the professional cooperation!


A productive winter
January 4, 2020

In spite of the inhospitable conditions, three plants in Saarland, near Berlin and in the Netherlands were put on the supports from November to January.


Hema rack thanks for the good cooperation and perseverance!


Further plants in the Upper Palatinate completed
August 27, 2019

In a tried and tested collaboration, additional systems were installed in the Upper Palatinate in August.
There are two systems with 750 kWp and 1.6 MWp installed with the base 
hema rack Type I.

New PV-system
installed in Lower Bavaria
August 21, 2019

An imposing 4.5 MWp system was built with the hema rack Type II system in Lower Bavaria.

Hema rack is thankful for the smooth cooperation!


zmh Systemmontagebau GmbH -
Competent and result-oriented
June 9, 2019

The hema rack GmbH and Hebert Systems GmbH found their own assembly company. In this way we can support our customers even better and expand capacities in the future. The fitters are already in training on various objects and systems and can therefore be deployed promptly. Another step forward!

hema rack GmbH and Hebert Systems Austria GmbH expand their production and office space
June 5, 2019

From the beginning of 2020, both companies will be able to move into additional office space in order to further expand the location and expand the workforce.
In addition to a water jet cutting system, we will set up a testing facility for material tests. This means we can continue to expand customer service.

"Holland" project
successfully completed
May 21, 2019

The 5.2 MWp plant in the Netherlands has also recently started producing solar energy. The entire system was implemented within just 5 weeks.


A huge system - a huge achievement. Hema rack thanks for the good cooperation!


Construction site in Upper Palatinate completed
May 24, 2019

Despite the difficult weather conditions, the installation company performed perfectly.
We thank everyone involved.

Project "Jocksdorf" successfully completed
Ferbruary 11, 2019

The installation of 3.4 MWp in Brandenburg was successful and was completed on schedule.

A great achievement by everyone involved.

PV-system in the Upper Palatinate with 750 kWp completed

January 4, 2019

Hema rack thanks everyone involved for the trust they have placed in us and
the good teamwork.


PV-system in Upper Bavaria with
750 kWp completed

January 4, 2019

In Upper Bavaria another 750 kWp system could be implemented within a very short time thanks to clean planning and punctual delivery of the components.
Hema rack thanks everyone involved for the trust they have placed in us and

the good teamwork.

hema rack GmbH delivers the

first trapezoidal roof racks

September 6, 2018

The new trapezoidal roof frame for large roofs has been very well received by customers because it is quick and easy to assemble. The inventory will be massively built up by the end of September in order to be able to guarantee delivery times of 3-4 days for systems from 750 KW.


The implementation of several open space systems is also already being planned.

Share by: